Plastic End Caps - Oval & Oblong Internal Fitting.
Brands you know and trust - Maumac
Plastic End Caps - Oval & Oblong Internal Fitting.
These plastic end caps are a strong, durable polyethylene plastic component that provides a clean, functional finish that protects and seals tube ends. The Oblong & Oval series plastic caps feature a slight dome head with rounded edges with a smooth shank for a snug fit. Our furniture hardware end caps come in a comprehensive range of internal diameters, review the “How to Measure” tab below. Check out the Plastic End Cap and Closure blog.
Oval & Oblong End Cap key features.
- Manufactured from polyethylene plastic.
- Internal fitting end cap for a snug fitting.
- Caps off and finishes oval or oblong tubing.
Maumac® Components is part of Aerobolt's furniture hardware range.
Plastic End Caps - Oval & Oblong Internal Fitting.
These plastic end caps are a strong, durable polyethylene plastic component that provides a clean, functional finish that protects and seals tube ends. The Oblong & Oval series plastic caps feature a slight dome head with rounded edges with a smooth shank for a snug fit. Our furniture hardware end caps come in a comprehensive range of internal diameters, review the “How to Measure” tab. Check out the Plastic End Cap and Closure blog.
Oval & Oblong End Cap key features.
- Manufactured from polyethylene plastic.
- Internal fitting end cap for a snug fitting.
- Caps off and finishes oval or oblong tubing.
Maumac® Components is part of Aerobolt's furniture hardware range.
How do I measure for end caps?
Internally Fitting End Caps.
For a correct fitting of an internal fitting end cap, start with the measurement of the tube's Internal Diameter (ID) with a ruler or Vernier (also known as a calliper).
Once you have the internal measurement of your tube, you can measure the Wall Thickness (WT) to ensure the head of the end cap encompasses the tube.
After you have these measurements, simply choose the cap with the relevant Body Diameter (BD) and Head Diameter (HD) to fit the tube.
Due to the materials used, you may find that certain products can stretch across a range of diameters, preventing the need for an exact measurement.
Externally Fitting End Caps.
Measure the tube diameters with a ruler or Vernier (also known as a calliper). For an external fitting cap/closure, the only measurement you’ll need is the Outer Diameter (OD) of the tube.
You can then start looking for the right external end cap to suit. Here you would need an external fitting cap with a Body Diameter (BD) that matches the Outer Diameter (OD) of the tube. Depending on the fit and look required, you may also need to look at the height of the cap and head style.
Plastic End Caps - Oval & Oblong Internal Fitting.
These plastic end caps are a strong, durable polyethylene plastic component that provides a clean, functional finish that protects and seals tube ends. The Oblong & Oval series plastic caps feature a slight dome head with rounded edges with a smooth shank for a snug fit. Our furniture hardware end caps come in a comprehensive range of internal diameters, review the “How to Measure” tab. Check out the Plastic End Cap and Closure blog.
Oval & Oblong End Cap key features.
- Manufactured from polyethylene plastic.
- Internal fitting end cap for a snug fitting.
- Caps off and finishes oval or oblong tubing.
Maumac® Components is part of Aerobolt's furniture hardware range.
How do I measure for end caps?
Internally Fitting End Caps.
For a correct fitting of an internal fitting end cap, start with the measurement of the tube's Internal Diameter (ID) with a ruler or Vernier (also known as a calliper).
Once you have the internal measurement of your tube, you can measure the Wall Thickness (WT) to ensure the head of the end cap encompasses the tube.
After you have these measurements, simply choose the cap with the relevant Body Diameter (BD) and Head Diameter (HD) to fit the tube.
Due to the materials used, you may find that certain products can stretch across a range of diameters, preventing the need for an exact measurement.
Externally Fitting End Caps.
Measure the tube diameters with a ruler or Vernier (also known as a calliper). For an external fitting cap/closure, the only measurement you’ll need is the Outer Diameter (OD) of the tube.
You can then start looking for the right external end cap to suit. Here you would need an external fitting cap with a Body Diameter (BD) that matches the Outer Diameter (OD) of the tube. Depending on the fit and look required, you may also need to look at the height of the cap and head style.
